How to prolong the service life of full-automatic PCB depaneler machine
Aug 16 , 2022
How
to prolong the service life of full-automatic PCB depaneler machine
1.
Before cutting, the pipe cutter shall adjust the cutting tool and clamp the
work object. The parking baffle shall be fixed, and the work can be carried out
only after the test run in the sequence of clamping, loosening, forward,
backward, etc. When the machine tool is rotating, no part of the human body
shall touch the transmission parts. During operation, the cuffs shall be well
tied. It is strictly forbidden to wear gloves. The spindle speed change must be
carried out after stopping. The gears should be fully meshed when changing
speed. If the machine tool is found to be abnormal, stop it immediately for
inspection.
2.
Replace the gear oil in the saw blade drive gearbox Generally, the new machine
should be replaced after 30 hours of continuous operation. In the future, it
should be replaced every three months. The gear box lubricant should use the
national standard 460 gear lubricant.
3.
Clean the iron filings on the workbench and the screw rod of the feeding vice,
and add lubricating oil for maintenance after cleaning.
The
cooling water shall be cleaned and replaced regularly, because the cooling
water is not replaced for a long time, it is easy to deteriorate and
flocculate; It is easy to cause the cooling water outlet to be blocked,
resulting in the failure of cooling or unsatisfactory cooling effect during the
cutting process, thus shortening the service life of the tool.
4.
After use, first cut off the power and stop the machine, remove the cutting
blade to prevent accidental cutting, and then clean the iron filings between
the clamping vice and the feeding cylinder and apply grease for lubrication
5.
When the material pipe is put into the material rack and the binding lead wire
is loosened, measures shall be taken to prevent the pipe from rolling,
impacting and crushing people. The PCB cutting machine can only be cut after
checking that the dust removal device is in good condition. When using the
grinding wheel pipe cutting machine, check whether the grinding wheel has
defects, cracks, moisture, and whether the power line is reliable. When
changing tools, measuring workpieces, lubricating and cleaning pipe heads, the
machine must be stopped.