At present, the enterprise has basically realized the mechanical PCB depaneling instead of manual breaking. Of course, in order to realize mechanical PCB depaneling, the application of this kind of machine is essential. Compared with manual breaking, it not only improves the production efficiency, but also greatly reduces the damage rate of products. So, what are the preparation steps for the operation process of the High Efficient PCB Router Machine? Let's look at the operation process of the router:

1. Check whether the equipment is powered on normally and confirm that the equipment has been reset and waiting for operation.

2. The operator shall determine the direction and positive and negative directions of the PCB board, place the PCB board on the special fixture, press it gently with the palm of his hand, confirm that the PCB board has been placed, put down the gland and ensure that the PCB board has been tightly covered.

3. Use the visual camera to adjust the programmed cutting path and confirm to save.

4. Press the start button, the PCB Router Machine starts to work, the vacuum cleaner, spindle, electrostatic removal, etc. will also start automatically, and the milling cutter divides boards according to the programmed cutting path.

5. Complete the whole assembly and PCB depaneling, the workbench will exit automatically, open the gland, make sure that the separated PCB board is not damaged, manually remove the product, replace the new PCB board, cover the gland, and click the start button to separate.

6. Repeat step 4.5 until all products are cut.