Using PCB Depanelizer on SMT assembly line can improve operation and production efficiency. The traditional manual breaking operation has poor effect. It is usually used in PCBA processing plants. This also adds two elements to operation and production. One is guarantee, the other is quality.

1. Pcb depanelizer is usually used in PCBA processing plant. Its purpose is to replace the traditional manual folding, improve production efficiency and ensure product quality.

2. At first glance, PCB Depanelizer is more complex. There will be a feeling of dizziness. However, in practical application, no matter what kind of circuit board is used, its application principle is not as complex as we think. In the practical application of PCB, there are three types: single-sided PCB, double-sided PCB and Multilayer PCB. In terms of the number of sides, the structure of single-sided PCB circuit board is the simplest.

3. Of course, in addition to considering safety issues in the design and construction of the PCB depanelizer machine manufacturer, in the actual operation process, employees should first carefully check the distance between the upper and lower cutters when turning on the power supply. When using the trigger of PCB depanelizer, it is strictly prohibited to extend it into the machine. When the machine is running under any circumstances, do not remove the protective board around the blade to avoid accidents. In addition, the PCB depanelizer only uses a daughter board. It is only used as a daughter board and cannot be used for other purposes. Electrostatic protection must be carried out throughout the use process, and operators must wear electrostatic rings.

4. When using the PCB separator, the staff must place the PCB separation slot on the fixed tool holder, and then move the PCB separator horizontally. Do not wear loose clothes when operating the machine. Hair must be tied up to prevent accidents.

5. During operation, the staff shall pay attention to maintenance, protect the upper and lower knife positioning plates and upper and lower blades, remove sundries on the surface and inside of the machine, and check the machine screws at any time. The situation is tightening. If the machine does not work for a long time, remove the upper and lower locating plates and upper and lower cutters to protect them with oil and wipe them clean before use. Also, before using the machine, check the wiring for damage.

6. In addition, daily inspection and maintenance must be carried out normally to check whether the blade is loose to avoid accidents during operation. If the PCB Depanelizer is abnormal and needs maintenance, first ensure that the power cord is unplugged from the socket., Operate to avoid electric shock hazard.