Preparatory work flow of China inline PCB milling cutter machine

With the development of economy and the expansion of industrial strength, the traditional production mode is not suitable for the existing economic mode, so new equipment is constantly introduced to meet the daily production needs. Among many equipment, China inline PCB milling cutter machine is a typical representative in the electronic industry. However, limited to the lack of manual professional and technical personnel and the lack of professionalism, resulting in frequent accidents caused by the inline PCB milling cutter machine, how to reduce accidents? Let's popularize it.

On-line PCB milling cutter machine without fixtures

1. Start up preparation: when the inline PCB depaneling router machine is officially put into use, first confirm whether the power supply is 220V, and then confirm whether the ground wire of the machine and the access point of the machine fall off. In order to avoid accidental electric shock during operation, staff must be well protected.

2. Confirm the connection of the foot switch: we need to check the connection of the foot switch. We need to turn on the power supply. When we touch our plate splitter, the light at 0 will flash. Only when the light is on, it can show that our switch is normally connected. For plate splitter of different brands, no matter where its knife is, as long as we press 0 first during operation, This light will flash.

3. Safety precautions: the voltage in the electric box and some lines of the board splitter is 380V. When repairing or maintaining, professional inspection technicians must first turn off the main power supply. During inspection, they should also wear professional electrician gloves and tools to avoid accidents.